This tab or index cutting machine made by Onglematic is ideal for making tab dividers - index dividers in house. This model can cut 2 to 12 tabs/dividers and will cut through up to 15 sheets at a time. Accurate measurements are printed on the bed of the machine to ensure accuracy and quick set-up. The user moves the positioning stop from one hole to the next. The length of each tab is calculated to be proportionate and equally shared on the sheet. This machine is able to cut up to 15 sheets 80gsm paper or the equivalent in card or polyropylene.
Tab Styles Available:
The two most popular tab styles is the standard 15 degree and the 12.7 double incline round corner, both give you a professional finish and are available to purchase online, please select below from tab styles.
Other styles of tab machine (tab styles are not interchangeable) are also available at an extra cost e.g 90 degree angle and round corner please contact 01908 563149.
Manual cutting achieved by pressing on the handle.
Paper format A4 (297mm)
Magnetic lateral stop and mm rule.
Can cut 180, 250, 500 gsm.
Pre programmed positions for tabs.
Variable tab depth up to 17mm (dependant on cutter shape chosen).
Variety of tab shape machines available.
Paper Capacity: Can cut 1-15 sheets of 80gsm in a single stroke
Positioning: Pre programmed positions manual.
Simply select number of tabs required from 1 to 12 then after each cut move the stopper down to the next position.
The magnetic side-lay stop can be moved to set the sheet width.
Standard tab samples above or island tabs are also possible sample below.