The Huanda HD650 for laminating sizes from small ID to A1 size documents. This professional heavy-duty laminator gives you exceptionally fine and consistent finish allowing you to laminate photos and digital work to the highest quality. This larger size laminator is also an ideal way to speed up larger A4 and A3 laminating runs as two can be run side by side.
- Uses high quality components including metal gears, larger 44mm diameter rollers and bigger motor.
- Robust, metal casing
- Variable temperature control
- Adjustable speed control
- Anti-jam reverse mode
- Ready light indicator
- Carrier free operation
- Designed for pouches up to 350 micron (2 x 175 micron per side)
- Maximum A1 pouch thickness 250 micron (2 x 125 micron per side)
- Max feed width - 650mm
- Laminating speed up to 660-1600 mm/min
- 10 minutes warm up time. Preheating time will vary with the ambient temperature. In general when the room temperature is higher the preheating time is less and the set temperature should be lowered. (See heat setting chart below).
- 4 Rollers. There are 4 screws under the bottom plate of the machine which are used for pressure adjustment of the front, rear, left & right sides of the rubber rollers. These screws can be adjusted when there is incomplete sealing on both or one side of the pouch.
- Dimensions - H-135mm x W-865mm x D-295mm / 30KG
IMPORTANT: If you intend to use your laminator for the lamination of small, multiple items in a larger pouch (i.e. flash cards or similar); odd-shaped items (i.e. stars, speech bubbles, etc.); or uneven items like children's artwork, collages or other uneven materials, you should purchase a life jacket pouch carrier. Failure to do so may risk jamming and damaging your laminator and invalidate your warranty.
