Ideal 7228-06 LT power guillotine

Product Information

The Ideal 7228-06LT has a 720mm cutting width with a electro mechanial blade and hydraulic clamp. The foot clamp is ideal for pre-clamping tough stocks, coupled along with an optical cutting line allowing you to see were exactly the cut is to be performed.

Equipped with power backgauge with "EP" backgauge control module. Digital display for measurement readout in cm or inches (display accurate to 1/10 mm or 1/100 inch). 10 button keypad for pre setting of measurement and memory key for repeat cuts. Programmable EP backgauge control module for 99 programs with 99 steps in each program (upto 9 repeat cuts can be integrated into a program as one single program step). Setting of program steps via start button. Programmable eject function for pushing out the cut sheets. Electronic hand wheel for manual backgauge positioning with infinitely variable speed control (from very slow to very fast).

Chilvers Reprographics are one of the UK 's longest established Ideal guillotine suppliers. All Guillotines and trimmers comply with UK HSE safety regulations. You can even part exchange your old guillotine.

Light beam safety curtain to secure the working area on the front table with a set of side tables (left and right) available at an extra cost. Electronic hand wheel for manual backgauge positioning with infinitely variable speed control (from very slow to very fast). Integrated calculator. Set function key for reference measurement. Self-diagnostic system with error indication on display.

Comprehensive SCS safety package:
IR safety curtain on the front table; transparent safety cover on the rear table; main switch and safety lock with key; electronically controlled true two-hand operation; 24 volt controls (low voltage); patented IDEAL safety drive; automatic blade and clamp return from every position; disc brake for instant blade stop; blade changing device with covered cutting edge; blade depth adjustment from the outside of the machine; easy blade change from the front of the machine without removing covers

• Cutting length 720mm.
• 40 programs.
• Air bed.
• Power cut, power clamp and power back-fence.
• Foot pedal for pre-clamping.
• Variable clamp pressure.
• Key pad control of back-fence with digital readout .
• Optical cutting line shows where the cut will be performed.
• Optional side tables.

Price: N/A

• Tell a Friend
• Add to wish list